@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================
#57=[Logix]HMI_RecipeOnline.CounterAndScale.MECHLdWhOp
#58=[Logix]HMI_RecipeOnline.CounterAndScale.MECHFdWhOp
#59=[Logix]HMI_RecipeOnline.CounterAndScale.MECHLdFdFlPlOp
#60=[Logix]HMI_RecipeOnline.CounterAndScale.MECHGlOpUpst
#61=[Logix]HMI_RecipeOnline.CounterAndScale.MECHDGlOpDnst
#62=[Logix]HMI_RecipeOnline.CounterAndScale.MECHGlueCarOp
#63=[Logix]HMI_RecipeOnline.CounterAndScale.MECHGlFlapOp
#85=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdWhOp
#86=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFdWhOp
#87=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLdFdFlPlOp
#88=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlOpUpst
#89=[Logix]HMI_RecipeOffline.CounterAndScale.MECHDGlOpDnst
#90=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlueCarOp
#91=[Logix]HMI_RecipeOffline.CounterAndScale.MECHGlFlapOp
#1=HMI\Labels\CounterScale8
#7=HMI\Labels\CounterScale9
#13=HMI\Labels\CounterScale10
#19=HMI\Labels\CounterScale11
#25=HMI\Labels\CounterScale12
#31=HMI\Labels\CounterScale13
#37=HMI\Labels\CounterScale14